Unresponsive Cooling System in Kenmore Refrigerator Model 795-73139-410

kenmore refrigerator

The experience of a sudden failure in an appliance that is integral to everyday life can be rather distressing. When your 7-year-old Kenmore refrigerator (model number 795-73139-410) begins showing signs of dysfunction, swift action needs to be taken to rectify the problem. Let's delve into identifying and remedying the situation where the condenser fan is operational, but there seems to be no temperature modulation occurring within the refrigeration system.

Understanding the Problem

To initiate the process of rectification, it is critical to first have a deep understanding of the issue at hand. From your description, it appears that the compressor is humming, indicating it is operational, yet there is a noticeable lack of cold on the discharge line and no hot on the suction line. Moreover, it's unclear whether the interior compartment fan is functioning.

Symptom Analysis

It is notable that the condenser fan is running, which suggests that the issue might not be with the power supply or the fan itself. The humming compressor also indicates that it is attempting to work, but the temperature discrepancies in the lines show that the cooling cycle is not being completed as it should.

There could be several reasons behind this sudden malfunction. Some of the possible causes might be a refrigerant leak, a blocked or malfunctioning evaporator, or an issue with the compressor itself.

Identifying the Right Solution

In order to ensure that the refrigerator returns to its optimum functioning condition, identifying the correct solution is of utmost importance. This involves a careful evaluation of each component involved in the cooling cycle.

Inspect the Compressor

The compressor, model LGFLB075LANA, seems to be humming but not effectively cooling the refrigerator. It would be prudent to start by checking the compressor for any signs of wear and tear or malfunction. This can be a complex process and might require professional intervention.

Assess the Interior Compartment Fan

Even though it isn't clear whether the interior compartment fan is working, it's essential to check its operational status. If the fan is not working, it might be causing inadequate circulation of cold air within the fridge, leading to the noted issues.

Implementing the Solution

Once the root cause has been identified, the next step is to implement a solution that rectifies the problem effectively.

Repair or Replace the Compressor

If the compressor is found to be the source of the problem, it might be necessary to repair or replace it. Depending on the extent of the damage, a professional technician can guide you on the best course of action.

Addressing Refrigerant Issues

In case of a refrigerant leak or issues with the refrigerant lines, the system might need to be recharged or repaired to restore the fridge to its functional state. This process should ideally be carried out by a trained technician to ensure safety and efficiency.

Servicing the Interior Fan

If the interior fan is found to be non-operational, it might need to be repaired or replaced. Ensuring that the fan is functioning correctly is crucial to maintaining the right temperature levels within the fridge.

Preventive Measures for Future

To prevent sudden failures in the future, it is essential to follow some preventive measures that can help in prolonging the life of your Kenmore refrigerator.

Regular Maintenance

Scheduling regular maintenance checks can help in identifying and addressing potential issues before they escalate into significant problems. These checks can include cleaning the coils, checking the seals, and ensuring that the fans are functioning correctly.

Monitoring the Refrigerator's Performance

Keeping a close eye on the refrigerator's performance can help in detecting any anomalies early on. If you notice any unusual noises, temperature fluctuations, or other signs of malfunction, it is advisable to seek professional help immediately.

Consulting a Professional

In case of any uncertainties or complex issues, consulting a professional technician can provide the right guidance and help in addressing the problem effectively.

Key Takeaways

When you encounter an issue with your refrigerator, following a systematic approach can sometimes help to identify and even rectify the problem before seeking professional help. Here is a list of handy tips to keep in mind:

  1. Visual Inspection. Start with a thorough visual inspection of the refrigerator, including checking the coils and the back panel for any visible issues.
  2. Check the Power Supply. Ensure that the refrigerator is receiving a steady power supply. Sometimes, fluctuations in power can cause disruptions in its functioning.
  3. Verify the Settings. Sometimes, inadvertent changes to the temperature settings can cause cooling issues. Ensure the refrigerator is set at the optimal temperature.
  4. Clean the Coils. Regular cleaning of the coils can sometimes improve the efficiency of the refrigerator. Make sure they are clean and free from dust and debris.
  5. Inspect the Seals. The seals on the refrigerator doors can sometimes wear out, causing cooling issues. Check the seals for any signs of wear and tear and replace them if necessary.
  6. Seek Professional Help. If you are unable to identify or fix the issue, don't hesitate to call a professional technician to avoid exacerbating the problem.


Encountering a sudden problem with your Kenmore refrigerator can be quite distressing. However, by understanding the potential issues and identifying the right solutions, you can work towards restoring its functionality swiftly. Remember, when in doubt, seeking the assistance of a trained technician can ensure that the problem is addressed accurately and efficiently, thereby preventing further complications in the future.